Jeffrey S. Klaus is the director of Intel Data Center Manager (DCM) Solutions . Jeff leads a global team that designs, builds, sells and supports Intel DCM, a software SDK that plugs in to Data Center Infrastructure Management (DCIM) software.
A data center manager recently raised a seemingly simple question in an online discussion thread: “How do I calculate per rack power consumption in my data center?” The forthcoming advice highlighted that there are as many answers to this question as there are vendors providing data center solutions.
There is a lot at stake – energy is an expensive and increasingly limited resource in the data center. Let’s look at some of the pros and cons for the most commonly suggested power calculation methods, so we understand the facts, and debunk the myths, surrounding this topic.
De-rating Manufacturers’ Maximums
Could power calculation be as simple as adding up the maximum requirements specified by equipment vendors? These manufacturers are held liable for the accuracy of their data, and so they invest in careful measurements and analysis in order to publish power specifications. A variety of tools are available for combining vendor data to match your data center design.
However, the conservative nature of this method of data center power calculation is also its drawback. The manufacturers’ ratings are typically worst-case estimations and often lead to over-provisioning of an expensive resource unless they are accurately de-rated. Opinions vary widely about the appropriate de-rating factor. In the above mentioned discussion thread, data center managers cited 20 to 50 percent de-rating, as common practice. And, it was noted that new equipment draws more power than “burned-in” equipment, meaning that the manufacturers’ specifications are less accurate as the equipment ages.
Data Center Power Meters
Those data center managers who don’t want to trust vendor data, or who wish to determine how to accurately derate published specifications, recommend taking actual power measurement. Certainly this yields results that are specific to your equipment, configurations and workloads. However, the manual process is time-consuming and therefore expensive.
Data center managers also pointed out the challenge of knowing where to take measurements. To save time, some take measurements for each row of racks. To maximize accuracy and gain the best baseline information, others recommend taking measurements at each rack or even for each server. Measurements must also be repeated, to keep up with changes to equipment and facilities, but just how often to take measurements appears to be yet another nebulous detail. Manual measurements also leave data center managers guessing about future requirements, workload variability and scalability issues.
Intelligent Data Center Power Distribution Units
Intelligent power distribution units (PDUs) are being deployed in many data centers today, for a variety of reasons. For those data centers with the budget for purchasing and managing an additional hardware layer, PDUs provide a stream of power data that reflects the current data center layout and workloads. As an added benefit, PDUs introduce a scheduling function that helps avoid spikes during periods of peak activity.
In addition to the added costs, however, PDUs require time for data collection and analysis just like manual power meter measurements. The data provided constitute snapshots in time, and can miss power spikes.
These methods are entirely focused on power, and do not take into account the additional data available from today’s servers. For example, most servers shipping after 2007 provide real-time power information and inlet temperature readings. Power will inevitably vary over time and must be managed as a dynamic resource as it relates to other environmental variables.
Power is not everything. Airflow parameters and temperatures throughout the data center and at the computer-area air handler (CRAH) equipment can also contribute to a better overall picture of the data center energy requirements over time.
With current energy costs at historically high levels and some utility companies unable to provide enough power for the largest data centers, IT and facilities managers need a more holistic approach for managing power. An ideal solution would provide a dynamic view of the data center, in terms of power, temperature and airflow, and would be extensible to keep pace with changes to the infrastructure and workloads.
A Better Question
Instead of focusing on how to calculate power, data center managers should raise a different question. How can we manage power consumption, airflow and temperature levels to maximize equipment-friendly conditions in the data center? This question will lead to methods and practices that can optimize energy efficiency as part of the bigger goal that extends the life of data center infrastructure and avoids conditions that can damage equipment and potentially disrupt business processes.
Answering the bigger question will also lead to an evaluation of the technology advances relating to holistic power management in the data center. These include middleware platforms that can pay for themselves by increasing efficiencies, avoiding over-provisioning and outages, and managing disaster recovery conditions. Besides automating the collection and aggregation of all available energy-related data, the best power management platforms provide a single pane of glass for viewing actual, real-time data center conditions.
Is It The Right Time to Raise a New Question?
Over-provisioning is no longer an affordable option and data center staff resources have been slashed to the bone. No one has time for ongoing manual data collection. It would seem that there has never been a better time to ask this question, as its answer may lead you to take advantage of the latest technological advances.
Industry Perspectives is a content channel at Data Center Knowledge highlighting thought leadership in the data center arena. See our guidelines and submission process  for information on participating. View previously published Industry Perspectives in our Knowledge Library .
Article printed from Data Center Knowledge: http://www.datacenterknowledge.com
URL to article: http://www.datacenterknowledge.com/archives/2012/06/26/debunking-data-center-power-myths/
URLs in this post:
 Intel Data Center Manager (DCM) Solutions: http://www.datacentermanager.intel.com/
 guidelines and submission process: http://www.datacenterknowledge.com/industry-perspectives-thought-leadership/
 Knowledge Library: http://www.datacenterknowledge.com/archives/category/perspectives/
 Industry Perspectives: http://www.datacenterknowledge.com/archives/author/industryp/
Click here to print.